The AVR Assembler Site

HOME
AVR ASM TUTOR
ASM FORUM
AVR BEGINNERS NET
TUTORIAL #2
MUL & DIV
FAST MUL & DIV
16 BIT MUL
16 BIT ADD & SUB
32 BIT MATH
16 BIT MATH
16 BIT DIV
24 BIT DIV
32 BIT DIV
FLOAT MATH
SQRT16
BCD CONVERSIONS
16 BIT BCD
DEC TO ASCII
INTEGER TO ASCII
HEX TO ASCII
MOVING AVG
FAST FOURIER
BLOCK COPY
LOAD PROG MEM
EPROM STORAGE
SERIAL EPROM
AT45 DATAFLASH
FLASH CARD
VFX SMIL
VFX MEM
BUBBLE SORT
CRC CHECK
XMODEM REC
UART 304
UART 305
UART 128
UART BUFF
USB TO RS232
AVR ISP
ISP 2313
ISP 1200
AVR SPI
I2C 300
I2C 302
I2C TWI26
I2C/TWI 128
I2C/TWI AT8
DALLAS-1W
DALLAS CRC
ETHERNET DRIVER
TEA PROTOCOL
ADC
10 BIT ADC
CHEAP ADC
PRECISION 8 BIT ADC
THERMOMETER
INFARED DECODER
LCD DRIVER FOR HD44xxx
LCD DRIVER FOR HD44780
LCD DRIVER FOR HD44780 #2
4x4 KEYPAD
KEYPAD LED MUX
AT/PS2 KEYBOARD
AT KEYBOARD
PS2 KEYBOARD
MEGA 8 BOOTLOADER
BOOTLOADER
ALARM CLOCK
REAL TIME CLOCK
90 DAY TIMER
DELAY ROUTINE
CALLER ID
DTMF GENERATOR
6 CHAN PWM
PWM 10K
ENCODER
STH-11
ATMEL CORP
AVR BUTTERFLY
AVR BOOK

HEX TO ASCII ROUTINE

 
                                    ;-----------------------------------------------
                                    ; HEX TO ASCII
                                    ;-----------------------------------------------
                                    ;I think, this was the smallest (only 10 words). 
                                    
                                    ;input: R16 = 8 bit value 0 ... 255 
                                    ;output: R18, R17, R16 = digits 
                                    ;bytes: 20 
                                    ; 
                                    bcd: 
                                    ldi r18, -1 + '0' 
                                    _bcd1: 
                                    inc r18 
                                    subi r16, 100 
                                    brcc _bcd1 
                                    ldi r17, 10 + '0' 
                                    _bcd2: 
                                    dec r17 
                                    subi r16, -10 
                                    brcs _bcd2 
                                    sbci r16, -'0' 
                                    ret  
                                     
                                    
                                    ;********************************************************************************************** 
                                    ;E. Seah 
                                    ;03/24/01 
                                    ;HEX-TO-ASCII conversion subroutine 
                                    ;"high" registers : 4 (3 if "value" can be "low" register) 
                                    ;"low" registers : 0 (1 if "value" can be "low" register) 
                                    ;program words : 22+1 (including return) 
                                    ; 
                                    ;description : convert 0x00<="value"<=0xff to 3 digits of ASCII in "hundreds","tens" and "ones" 
                                    ; 
                                    _h2a: ldi hundreds,200 ;init hundreds for hundreds cp loop 
                                    ldi ones,2 ;init ones for hundreds cp loop 
                                    
                                    a100: cp value,hundreds 
                                    brlo sub100 ;if value=hundreds 
                                    sub value,hundreds ;remove 100s from value 
                                    subi ones,-0x30 ;?00<=x<=?99, 1st digit is '?' 
                                    mov hundreds,ones 
                                    ldi tens,90 ;init tens for tens cp loop 
                                    ldi ones,9 ;init ones for tens cp loop 
                                    a10: cp value,tens 
                                    brlo sub10 ;if value=tens 
                                    sub value,tens ;remove 10s from value 
                                    subi ones,-0x30 ;?0<=x<=?9, 2nd digit is '?' 
                                    mov tens,ones 
                                    
                                    mov ones,value ;3rd digit is the remainder 
                                    subi ones,-0x30 ;'ones' in ASCII 
                                    
                                    ret 
                                    
                                    sub100: subi hundreds,100 ;for compare with value 
                                    subi ones,1 ;use ones as temp storage for 1st digit 
                                    rjmp a100 
                                    
                                    sub10: subi tens,10 ;for compare with value 
                                    subi ones,1 ;use ones as temp storage for 2nd digit 
                                    rjmp a10
                                    
                                    
                                 

Programming the AVR Microcontrollers in Assember Machine Language

This site is a member of WebRing.
To browse visit Here.

Atmel AVR From Wikipedia, the free encyclopedia (Redirected from Avr) Jump to: navigation, search The AVRs are a family of RISC microcontrollers from Atmel. Their internal architecture was conceived by two students: Alf-Egil Bogen and Vegard Wollan, at the Norwegian Institute of Technology (NTH] and further developed at Atmel Norway, a subsidiary founded by the two architects. Atmel recently released the Atmel AVR32 line of microcontrollers. These are 32-bit RISC devices featuring SIMD and DSP instructions, along with many additional features for audio and video processing, intended to compete with ARM based processors. Note that the use of "AVR" in this article refers to the 8-bit RISC line of Atmel AVR Microcontrollers. The acronym AVR has been reported to stand for Advanced Virtual RISC. It's also rumoured to stand for the company's founders: Alf and Vegard, who are evasive when questioned about it. Contents [hide] 1 Device Overview 1.1 Program Memory 1.2 Data Memory and Registers 1.3 EEPROM 1.4 Program Execution 1.5 Speed 2 Development 3 Features 4 Footnotes 5 See also 6 External Links 6.1 Atmel Official Links 6.2 AVR Forums & Discussion Groups 6.3 Machine Language Development 6.4 C Language Development 6.5 BASIC & Other AVR Languages 6.6 AVR Butterfly Specific 6.7 Other AVR Links [edit] Device Overview The AVR is a Harvard architecture machine with programs and data stored and addressed separately. Flash, EEPROM, and SRAM are all integrated onto a single die, removing the need for external memory (though still available on some devices). [edit] Program Memory Program instructions are stored in semi-permanent Flash memory. Each instruction for the AVR line is either 16 or 32 bits in length. The Flash memory is addressed using 16 bit word sizes. The size of the program memory is indicated in the naming of the device itself. For instance, the ATmega64x line has 64Kbytes of Flash. Almost all AVR devices are self-programmable. [edit] Data Memory and Registers The data address space consists of the register file, I/O registers, and SRAM. The AVRs have thirty-two single-byte registers and are classified as 8-bit RISC devices. The working registers are mapped in as the first thirty-two memory spaces (000016-001F16) followed by the 64 I/O registers (002016-005F16). The actual usable RAM starts after both these sections (address 006016). (Note that the I/O register space may be larger on some more extensive devices, in which case memory mapped I/O registers will occupy a portion of the SRAM.) Even though there are separate addressing schemes and optimized opcodes for register file and I/O register access, all can still be addressed and manipulated as if they were in SRAM. [edit] EEPROM Almost all devices have on-die EEPROM. This is most often used for long-term parameter storage to be retrieved even after cycling the power of the device. [edit] Program Execution Atmel's AVRs have a single level pipeline design. The next machine instruction is fetched as the current one is executing. Most instructions take just one or two clock cycles, making AVRs relatively fast among the eight-bit microcontrollers. The AVR family of processors were designed for the efficient execution of compiled C code. The AVR instruction set is more orthogonal than most eight-bit microcontrollers, however, it is not completely regular: Pointer registers X, Y, and Z have addressing capabilities that are different from each other. Register locations R0 to R15 have different addressing capabilities than register locations R16 to R31. I/O ports 0 to 31 have different addressing capabilities than I/O ports 32 to 63. CLR affects flags, while SER does not, even though they are complementary instructions. CLR set all bits to zero and SER sets them to one. (Note though, that neither CLR nor SER are native instructions. Instead CLR is syntactic sugar for [produces the same machine code as] EOR R,R while SER is syntactic sugar for LDI R,$FF. Math operations such as EOR modify flags while moves/loads/stores/branches such as LDI do not.) [edit] Speed The AVR line can normally support clock speeds from 0-16MHz, with some devices reaching 20MHz. Lower powered operation usually requires a reduced clock speed. All AVRs feature an on-chip oscillator, removing the need for external clocks or resonator circuitry. Because many operations on the AVR are single cycle, the AVR can achieve up to 1MIPS per MHz. [edit] Development AVRs have a large following due to the free and inexpensive development tools available, including reasonably priced development boards and free development software. The AVRs are marketed under various names that share the same basic core but with different peripheral and memory combinations. Some models (notably, the ATmega range) have additional instructions to make arithmetic faster. Compatibility amongst chips is fairly good. See external links for sites relating to AVR development. [edit] Features Current AVRs offer a wide range of features: RISC Core Running Many Single Cycle Instructions Multifunction, Bi-directional I/O Ports with Internal, Configurable Pull-up Resistors Multiple Internal Oscillators Internal, Self-Programmable Instruction Flash Memory up to 256K In-System Programmable using ICSP, JTAG, or High Voltage methods Optional Boot Code Section with Independent Lock Bits for Protection Internal Data EEPROM up to 4KB Internal SRAM up to 8K 8-Bit and 16-Bit Timers PWM Channels & dead time generator Lighting (PWM Specific) Controller models Dedicated I²C Compatible Two-Wire Interface (TWI) Synchronous/Asynchronous Serial Peripherals (UART/USART) (As used with RS-232,RS-485, and more) Serial Peripheral Interface (SPI) CAN Controller Support USB Controller Support Proper High-speed hardware & Hub controller with embedded AVR. Also freely available low-speed (HID) software emulation Ethernet Controller Support Universal Serial Interface (USI) for Two or Three-Wire Synchronous Data Transfer Analog Comparators LCD Controller Support 10-Bit A/D Converters, with multiplex of up to 16 channels Brownout Detection Watchdog Timer (WDT) Low-voltage Devices Operating Down to 1.8v Multiple Power-Saving Sleep Modes picoPower Devices Atmel AVR assembler programming language Atmel AVR machine programming language Atmel AVR From Wikipedia, the free encyclopedia (Redirected from Avr) Jump to: navigation, search The AVRs are a family of RISC microcontrollers from Atmel. Their internal architecture was conceived by two students: Alf-Egil Bogen and Vegard Wollan, at the Norwegian Institute of Technology (NTH] and further developed at Atmel Norway, a subsidiary founded by the two architects. Atmel recently released the Atmel AVR32 line of microcontrollers. These are 32-bit RISC devices featuring SIMD and DSP instructions, along with many additional features for audio and video processing, intended to compete with ARM based processors. Note that the use of "AVR" in this article refers to the 8-bit RISC line of Atmel AVR Microcontrollers. The acronym AVR has been reported to stand for Advanced Virtual RISC. It's also rumoured to stand for the company's founders: Alf and Vegard, who are evasive when questioned about it. Contents [hide] 1 Device Overview 1.1 Program Memory 1.2 Data Memory and Registers 1.3 EEPROM 1.4 Program Execution 1.5 Speed 2 Development 3 Features 4 Footnotes 5 See also 6 External Links 6.1 Atmel Official Links 6.2 AVR Forums & Discussion Groups 6.3 Machine Language Development 6.4 C Language Development 6.5 BASIC & Other AVR Languages 6.6 AVR Butterfly Specific 6.7 Other AVR Links [edit] Device Overview The AVR is a Harvard architecture machine with programs and data stored and addressed separately. Flash, EEPROM, and SRAM are all integrated onto a single die, removing the need for external memory (though still available on some devices). [edit] Program Memory Program instructions are stored in semi-permanent Flash memory. Each instruction for the AVR line is either 16 or 32 bits in length. The Flash memory is addressed using 16 bit word sizes. The size of the program memory is indicated in the naming of the device itself. For instance, the ATmega64x line has 64Kbytes of Flash. Almost all AVR devices are self-programmable. [edit] Data Memory and Registers The data address space consists of the register file, I/O registers, and SRAM. The AVRs have thirty-two single-byte registers and are classified as 8-bit RISC devices. The working registers are mapped in as the first thirty-two memory spaces (000016-001F16) followed by the 64 I/O registers (002016-005F16). The actual usable RAM starts after both these sections (address 006016). (Note that the I/O register space may be larger on some more extensive devices, in which case memory mapped I/O registers will occupy a portion of the SRAM.) Even though there are separate addressing schemes and optimized opcodes for register file and I/O register access, all can still be addressed and manipulated as if they were in SRAM. [edit] EEPROM Almost all devices have on-die EEPROM. This is most often used for long-term parameter storage to be retrieved even after cycling the power of the device. [edit] Program Execution Atmel's AVRs have a single level pipeline design. The next machine instruction is fetched as the current one is executing. Most instructions take just one or two clock cycles, making AVRs relatively fast among the eight-bit microcontrollers. The AVR family of processors were designed for the efficient execution of compiled C code. The AVR instruction set is more orthogonal than most eight-bit microcontrollers, however, it is not completely regular: Pointer registers X, Y, and Z have addressing capabilities that are different from each other. Register locations R0 to R15 have different addressing capabilities than register locations R16 to R31. I/O ports 0 to 31 have different addressing capabilities than I/O ports 32 to 63. CLR affects flags, while SER does not, even though they are complementary instructions. CLR set all bits to zero and SER sets them to one. (Note though, that neither CLR nor SER are native instructions. Instead CLR is syntactic sugar for [produces the same machine code as] EOR R,R while SER is syntactic sugar for LDI R,$FF. Math operations such as EOR modify flags while moves/loads/stores/branches such as LDI do not.) [edit] Speed The AVR line can normally support clock speeds from 0-16MHz, with some devices reaching 20MHz. Lower powered operation usually requires a reduced clock speed. All AVRs feature an on-chip oscillator, removing the need for external clocks or resonator circuitry. Because many operations on the AVR are single cycle, the AVR can achieve up to 1MIPS per MHz. [edit] Development AVRs have a large following due to the free and inexpensive development tools available, including reasonably priced development boards and free development software. The AVRs are marketed under various names that share the same basic core but with different peripheral and memory combinations. Some models (notably, the ATmega range) have additional instructions to make arithmetic faster. Compatibility amongst chips is fairly good. See external links for sites relating to AVR development. [edit] Features Current AVRs offer a wide range of features: RISC Core Running Many Single Cycle Instructions Multifunction, Bi-directional I/O Ports with Internal, Configurable Pull-up Resistors Multiple Internal Oscillators Internal, Self-Programmable Instruction Flash Memory up to 256K In-System Programmable using ICSP, JTAG, or High Voltage methods Optional Boot Code Section with Independent Lock Bits for Protection Internal Data EEPROM up to 4KB Internal SRAM up to 8K 8-Bit and 16-Bit Timers PWM Channels & dead time generator Lighting (PWM Specific) Controller models Dedicated I²C Compatible Two-Wire Interface (TWI) Synchronous/Asynchronous Serial Peripherals (UART/USART) (As used with RS-232,RS-485, and more) Serial Peripheral Interface (SPI) CAN Controller Support USB Controller Support Proper High-speed hardware & Hub controller with embedded AVR. Also freely available low-speed (HID) software emulation Ethernet Controller Support Universal Serial Interface (USI) for Two or Three-Wire Synchronous Data Transfer Analog Comparators LCD Controller Support 10-Bit A/D Converters, with multiplex of up to 16 channels Brownout Detection Watchdog Timer (WDT) Low-voltage Devices Operating Down to 1.8v Multiple Power-Saving Sleep Modes picoPower Devices Atmel AVR assembler programming language Atmel AVR machine programming language Atmel AVR From Wikipedia, the free encyclopedia (Redirected from Avr) Jump to: navigation, search The AVRs are a family of RISC microcontrollers from Atmel. Their internal architecture was conceived by two students: Alf-Egil Bogen and Vegard Wollan, at the Norwegian Institute of Technology (NTH] and further developed at Atmel Norway, a subsidiary founded by the two architects. Atmel recently released the Atmel AVR32 line of microcontrollers. These are 32-bit RISC devices featuring SIMD and DSP instructions, along with many additional features for audio and video processing, intended to compete with ARM based processors. Note that the use of "AVR" in this article refers to the 8-bit RISC line of Atmel AVR Microcontrollers. The acronym AVR has been reported to stand for Advanced Virtual RISC. It's also rumoured to stand for the company's founders: Alf and Vegard, who are evasive when questioned about it. Contents [hide] 1 Device Overview 1.1 Program Memory 1.2 Data Memory and Registers 1.3 EEPROM 1.4 Program Execution 1.5 Speed 2 Development 3 Features 4 Footnotes 5 See also 6 External Links 6.1 Atmel Official Links 6.2 AVR Forums & Discussion Groups 6.3 Machine Language Development 6.4 C Language Development 6.5 BASIC & Other AVR Languages 6.6 AVR Butterfly Specific 6.7 Other AVR Links [edit] Device Overview The AVR is a Harvard architecture machine with programs and data stored and addressed separately. Flash, EEPROM, and SRAM are all integrated onto a single die, removing the need for external memory (though still available on some devices). [edit] Program Memory Program instructions are stored in semi-permanent Flash memory. Each instruction for the AVR line is either 16 or 32 bits in length. The Flash memory is addressed using 16 bit word sizes. The size of the program memory is indicated in the naming of the device itself. For instance, the ATmega64x line has 64Kbytes of Flash. Almost all AVR devices are self-programmable. [edit] Data Memory and Registers The data address space consists of the register file, I/O registers, and SRAM. The AVRs have thirty-two single-byte registers and are classified as 8-bit RISC devices. The working registers are mapped in as the first thirty-two memory spaces (000016-001F16) followed by the 64 I/O registers (002016-005F16). The actual usable RAM starts after both these sections (address 006016). (Note that the I/O register space may be larger on some more extensive devices, in which case memory mapped I/O registers will occupy a portion of the SRAM.) Even though there are separate addressing schemes and optimized opcodes for register file and I/O register access, all can still be addressed and manipulated as if they were in SRAM. [edit] EEPROM Almost all devices have on-die EEPROM. This is most often used for long-term parameter storage to be retrieved even after cycling the power of the device. [edit] Program Execution Atmel's AVRs have a single level pipeline design. The next machine instruction is fetched as the current one is executing. Most instructions take just one or two clock cycles, making AVRs relatively fast among the eight-bit microcontrollers. The AVR family of processors were designed for the efficient execution of compiled C code. The AVR instruction set is more orthogonal than most eight-bit microcontrollers, however, it is not completely regular: Pointer registers X, Y, and Z have addressing capabilities that are different from each other. Register locations R0 to R15 have different addressing capabilities than register locations R16 to R31. I/O ports 0 to 31 have different addressing capabilities than I/O ports 32 to 63. CLR affects flags, while SER does not, even though they are complementary instructions. CLR set all bits to zero and SER sets them to one. (Note though, that neither CLR nor SER are native instructions. Instead CLR is syntactic sugar for [produces the same machine code as] EOR R,R while SER is syntactic sugar for LDI R,$FF. Math operations such as EOR modify flags while moves/loads/stores/branches such as LDI do not.) [edit] Speed The AVR line can normally support clock speeds from 0-16MHz, with some devices reaching 20MHz. Lower powered operation usually requires a reduced clock speed. All AVRs feature an on-chip oscillator, removing the need for external clocks or resonator circuitry. Because many operations on the AVR are single cycle, the AVR can achieve up to 1MIPS per MHz. [edit] Development AVRs have a large following due to the free and inexpensive development tools available, including reasonably priced development boards and free development software. The AVRs are marketed under various names that share the same basic core but with different peripheral and memory combinations. Some models (notably, the ATmega range) have additional instructions to make arithmetic faster. Compatibility amongst chips is fairly good. See external links for sites relating to AVR development. [edit] Features Current AVRs offer a wide range of features: RISC Core Running Many Single Cycle Instructions Multifunction, Bi-directional I/O Ports with Internal, Configurable Pull-up Resistors Multiple Internal Oscillators Internal, Self-Programmable Instruction Flash Memory up to 256K In-System Programmable using ICSP, JTAG, or High Voltage methods Optional Boot Code Section with Independent Lock Bits for Protection Internal Data EEPROM up to 4KB Internal SRAM up to 8K 8-Bit and 16-Bit Timers PWM Channels & dead time generator Lighting (PWM Specific) Controller models Dedicated I²C Compatible Two-Wire Interface (TWI) Synchronous/Asynchronous Serial Peripherals (UART/USART) (As used with RS-232,RS-485, and more) Serial Peripheral Interface (SPI) CAN Controller Support USB Controller Support Proper High-speed hardware & Hub controller with embedded AVR. Also freely available low-speed (HID) software emulation Ethernet Controller Support Universal Serial Interface (USI) for Two or Three-Wire Synchronous Data Transfer Analog Comparators LCD Controller Support 10-Bit A/D Converters, with multiplex of up to 16 channels Brownout Detection Watchdog Timer (WDT) Low-voltage Devices Operating Down to 1.8v Multiple Power-Saving Sleep Modes picoPower Devices Atmel AVR assembler programming language Atmel AVR machine programming language