; universal signed, unsigned decimal number to ASCII convert
; MSB -> LSB = r23:r22 ZH:ZL
_print24bit: ; Print unsigned 24 bit values
clr r23
rjmp _prnum
_printsdecw: ; Print signed decimal (16 bit)
sbrs zh,7 ; Is the number < 0 ?
rjmp _printdecw ; No, print 0 to 32767
ser r22
ser r23
rjmp _printsdecdw
_printdecb: ; Print (8 bit) value
clr zh
_printdecw: ; Print unsigned decimal (16 bit)
clr r22
clr r23
_printsdecdw: ; Print signed decimal (32 bit)
sbrs r23,7
rjmp _printdecdw
com zl
com zh
com r22
com r23
subi zl,-1
sbci zh,-1
sbci r22,-1
sbci r23,-1
ldi r24,'-'
rcall _putchar
_printdecdw: ; Print unsigned decimal (32 bit)
_prnum:
push yl
push yh
clr r1
clr r2
clr r3
clr r4
clr r5
ldi r20,32
_prnum1:
ldi yl,1
clr yh
ldi r21,5
_prnum2:
ldi r25,51
ld r24,y
add r24,r25
sbrc r24,7
andi r25,15
sbrc r24,3
andi r25,240
sub r24,r25
st y+,r24
dec r21
brne _prnum2
lsl zl
rol zh
rol r22
rol r23
rol r1
rol r2
rol r3
rol r4
rol r5
dec r20
brne _prnum1
clt
ldi zl,6
clr zh
_prnum3:
ld r24,-z
rcall _prnum5
cpi zl,2
brsh _prnum3
brts _prnum4
set
mov r24,r1
rcall _prnum6
_prnum4:
pop yh
pop yl
ret
_prnum5:
push r24
swap r24
rcall _prnum6
pop r24
_prnum6:
andi r24,0x0f ; convert to ASCII and eliminate leading zeros
subi r24,-'0'
brts _putchar
cpi r24,'0'
brne _prnum7
; if you want leading spaces for nice format, add here "ldi r24, ' ' rjmp _putchar
ret
_prnum7:
set
_putchar:
rjmp _my_output_char_routine ; RS232, LCD, I2C etc, etc...
Programming the AVR Microcontrollers in Assember Machine Language
Atmel AVR From Wikipedia, the free encyclopedia (Redirected from Avr) Jump to: navigation, search The AVRs are a family
of RISC microcontrollers from Atmel. Their internal architecture was conceived by two students: Alf-Egil Bogen and Vegard
Wollan, at the Norwegian Institute of Technology (NTH] and further developed at Atmel Norway, a subsidiary founded by the
two architects. Atmel recently released the Atmel AVR32 line of microcontrollers. These are 32-bit RISC devices featuring
SIMD and DSP instructions, along with many additional features for audio and video processing, intended to compete with ARM
based processors. Note that the use of "AVR" in this article refers to the 8-bit RISC line of Atmel AVR Microcontrollers.
The acronym AVR has been reported to stand for Advanced Virtual RISC. It's also rumoured to stand for the company's founders:
Alf and Vegard, who are evasive when questioned about it. Contents [hide] 1 Device Overview 1.1 Program Memory 1.2 Data Memory
and Registers 1.3 EEPROM 1.4 Program Execution 1.5 Speed 2 Development 3 Features 4 Footnotes 5 See also 6 External Links
6.1 Atmel Official Links 6.2 AVR Forums & Discussion Groups 6.3 Machine Language Development 6.4 C Language Development
6.5 BASIC & Other AVR Languages 6.6 AVR Butterfly Specific 6.7 Other AVR Links [edit] Device Overview The AVR is a Harvard
architecture machine with programs and data stored and addressed separately. Flash, EEPROM, and SRAM are all integrated onto
a single die, removing the need for external memory (though still available on some devices). [edit] Program Memory Program
instructions are stored in semi-permanent Flash memory. Each instruction for the AVR line is either 16 or 32 bits in length.
The Flash memory is addressed using 16 bit word sizes. The size of the program memory is indicated in the naming of the device
itself. For instance, the ATmega64x line has 64Kbytes of Flash. Almost all AVR devices are self-programmable. [edit] Data
Memory and Registers The data address space consists of the register file, I/O registers, and SRAM. The AVRs have thirty-two
single-byte registers and are classified as 8-bit RISC devices. The working registers are mapped in as the first thirty-two
memory spaces (000016-001F16) followed by the 64 I/O registers (002016-005F16). The actual usable RAM starts after both these
sections (address 006016). (Note that the I/O register space may be larger on some more extensive devices, in which case memory
mapped I/O registers will occupy a portion of the SRAM.) Even though there are separate addressing schemes and optimized opcodes
for register file and I/O register access, all can still be addressed and manipulated as if they were in SRAM. [edit] EEPROM
Almost all devices have on-die EEPROM. This is most often used for long-term parameter storage to be retrieved even after
cycling the power of the device. [edit] Program Execution Atmel's AVRs have a single level pipeline design. The next machine
instruction is fetched as the current one is executing. Most instructions take just one or two clock cycles, making AVRs relatively
fast among the eight-bit microcontrollers. The AVR family of processors were designed for the efficient execution of compiled
C code. The AVR instruction set is more orthogonal than most eight-bit microcontrollers, however, it is not completely regular:
Pointer registers X, Y, and Z have addressing capabilities that are different from each other. Register locations R0 to R15
have different addressing capabilities than register locations R16 to R31. I/O ports 0 to 31 have different addressing capabilities
than I/O ports 32 to 63. CLR affects flags, while SER does not, even though they are complementary instructions. CLR set all
bits to zero and SER sets them to one. (Note though, that neither CLR nor SER are native instructions. Instead CLR is syntactic
sugar for [produces the same machine code as] EOR R,R while SER is syntactic sugar for LDI R,$FF. Math operations such as
EOR modify flags while moves/loads/stores/branches such as LDI do not.) [edit] Speed The AVR line can normally support clock
speeds from 0-16MHz, with some devices reaching 20MHz. Lower powered operation usually requires a reduced clock speed. All
AVRs feature an on-chip oscillator, removing the need for external clocks or resonator circuitry. Because many operations
on the AVR are single cycle, the AVR can achieve up to 1MIPS per MHz. [edit] Development AVRs have a large following due to
the free and inexpensive development tools available, including reasonably priced development boards and free development
software. The AVRs are marketed under various names that share the same basic core but with different peripheral and memory
combinations. Some models (notably, the ATmega range) have additional instructions to make arithmetic faster. Compatibility
amongst chips is fairly good. See external links for sites relating to AVR development. [edit] Features Current AVRs offer
a wide range of features: RISC Core Running Many Single Cycle Instructions Multifunction, Bi-directional I/O Ports with Internal,
Configurable Pull-up Resistors Multiple Internal Oscillators Internal, Self-Programmable Instruction Flash Memory up to 256K
In-System Programmable using ICSP, JTAG, or High Voltage methods Optional Boot Code Section with Independent Lock Bits for
Protection Internal Data EEPROM up to 4KB Internal SRAM up to 8K 8-Bit and 16-Bit Timers PWM Channels & dead time generator
Lighting (PWM Specific) Controller models Dedicated I²C Compatible Two-Wire Interface (TWI) Synchronous/Asynchronous Serial
Peripherals (UART/USART) (As used with RS-232,RS-485, and more) Serial Peripheral Interface (SPI) CAN Controller Support USB
Controller Support Proper High-speed hardware & Hub controller with embedded AVR. Also freely available low-speed (HID)
software emulation Ethernet Controller Support Universal Serial Interface (USI) for Two or Three-Wire Synchronous Data Transfer
Analog Comparators LCD Controller Support 10-Bit A/D Converters, with multiplex of up to 16 channels Brownout Detection Watchdog
Timer (WDT) Low-voltage Devices Operating Down to 1.8v Multiple Power-Saving Sleep Modes picoPower Devices
Atmel AVR assembler programming language
Atmel AVR machine programming language
Atmel AVR From Wikipedia, the free encyclopedia (Redirected from Avr) Jump to: navigation, search The AVRs are a family of
RISC microcontrollers from Atmel. Their internal architecture was conceived by two students: Alf-Egil Bogen and Vegard Wollan,
at the Norwegian Institute of Technology (NTH] and further developed at Atmel Norway, a subsidiary founded by the two architects.
Atmel recently released the Atmel AVR32 line of microcontrollers. These are 32-bit RISC devices featuring SIMD and DSP instructions,
along with many additional features for audio and video processing, intended to compete with ARM based processors. Note that
the use of "AVR" in this article refers to the 8-bit RISC line of Atmel AVR Microcontrollers. The acronym AVR has been reported
to stand for Advanced Virtual RISC. It's also rumoured to stand for the company's founders: Alf and Vegard, who are evasive
when questioned about it. Contents [hide] 1 Device Overview 1.1 Program Memory 1.2 Data Memory and Registers 1.3 EEPROM 1.4
Program Execution 1.5 Speed 2 Development 3 Features 4 Footnotes 5 See also 6 External Links 6.1 Atmel Official Links 6.2
AVR Forums & Discussion Groups 6.3 Machine Language Development 6.4 C Language Development 6.5 BASIC & Other AVR Languages
6.6 AVR Butterfly Specific 6.7 Other AVR Links [edit] Device Overview The AVR is a Harvard architecture machine with programs
and data stored and addressed separately. Flash, EEPROM, and SRAM are all integrated onto a single die, removing the need
for external memory (though still available on some devices). [edit] Program Memory Program instructions are stored in semi-permanent
Flash memory. Each instruction for the AVR line is either 16 or 32 bits in length. The Flash memory is addressed using 16
bit word sizes. The size of the program memory is indicated in the naming of the device itself. For instance, the ATmega64x
line has 64Kbytes of Flash. Almost all AVR devices are self-programmable. [edit] Data Memory and Registers The data address
space consists of the register file, I/O registers, and SRAM. The AVRs have thirty-two single-byte registers and are classified
as 8-bit RISC devices. The working registers are mapped in as the first thirty-two memory spaces (000016-001F16) followed
by the 64 I/O registers (002016-005F16). The actual usable RAM starts after both these sections (address 006016). (Note that
the I/O register space may be larger on some more extensive devices, in which case memory mapped I/O registers will occupy
a portion of the SRAM.) Even though there are separate addressing schemes and optimized opcodes for register file and I/O
register access, all can still be addressed and manipulated as if they were in SRAM. [edit] EEPROM Almost all devices have
on-die EEPROM. This is most often used for long-term parameter storage to be retrieved even after cycling the power of the
device. [edit] Program Execution Atmel's AVRs have a single level pipeline design. The next machine instruction is fetched
as the current one is executing. Most instructions take just one or two clock cycles, making AVRs relatively fast among the
eight-bit microcontrollers. The AVR family of processors were designed for the efficient execution of compiled C code. The
AVR instruction set is more orthogonal than most eight-bit microcontrollers, however, it is not completely regular: Pointer
registers X, Y, and Z have addressing capabilities that are different from each other. Register locations R0 to R15 have different
addressing capabilities than register locations R16 to R31. I/O ports 0 to 31 have different addressing capabilities than
I/O ports 32 to 63. CLR affects flags, while SER does not, even though they are complementary instructions. CLR set all bits
to zero and SER sets them to one. (Note though, that neither CLR nor SER are native instructions. Instead CLR is syntactic
sugar for [produces the same machine code as] EOR R,R while SER is syntactic sugar for LDI R,$FF. Math operations such as
EOR modify flags while moves/loads/stores/branches such as LDI do not.) [edit] Speed The AVR line can normally support clock
speeds from 0-16MHz, with some devices reaching 20MHz. Lower powered operation usually requires a reduced clock speed. All
AVRs feature an on-chip oscillator, removing the need for external clocks or resonator circuitry. Because many operations
on the AVR are single cycle, the AVR can achieve up to 1MIPS per MHz. [edit] Development AVRs have a large following due to
the free and inexpensive development tools available, including reasonably priced development boards and free development
software. The AVRs are marketed under various names that share the same basic core but with different peripheral and memory
combinations. Some models (notably, the ATmega range) have additional instructions to make arithmetic faster. Compatibility
amongst chips is fairly good. See external links for sites relating to AVR development. [edit] Features Current AVRs offer
a wide range of features: RISC Core Running Many Single Cycle Instructions Multifunction, Bi-directional I/O Ports with Internal,
Configurable Pull-up Resistors Multiple Internal Oscillators Internal, Self-Programmable Instruction Flash Memory up to 256K
In-System Programmable using ICSP, JTAG, or High Voltage methods Optional Boot Code Section with Independent Lock Bits for
Protection Internal Data EEPROM up to 4KB Internal SRAM up to 8K 8-Bit and 16-Bit Timers PWM Channels & dead time generator
Lighting (PWM Specific) Controller models Dedicated I²C Compatible Two-Wire Interface (TWI) Synchronous/Asynchronous Serial
Peripherals (UART/USART) (As used with RS-232,RS-485, and more) Serial Peripheral Interface (SPI) CAN Controller Support USB
Controller Support Proper High-speed hardware & Hub controller with embedded AVR. Also freely available low-speed (HID)
software emulation Ethernet Controller Support Universal Serial Interface (USI) for Two or Three-Wire Synchronous Data Transfer
Analog Comparators LCD Controller Support 10-Bit A/D Converters, with multiplex of up to 16 channels Brownout Detection Watchdog
Timer (WDT) Low-voltage Devices Operating Down to 1.8v Multiple Power-Saving Sleep Modes picoPower Devices
Atmel AVR assembler programming language
Atmel AVR machine programming language
Atmel AVR From Wikipedia, the free encyclopedia (Redirected from Avr) Jump to: navigation, search The AVRs are a family of
RISC microcontrollers from Atmel. Their internal architecture was conceived by two students: Alf-Egil Bogen and Vegard Wollan,
at the Norwegian Institute of Technology (NTH] and further developed at Atmel Norway, a subsidiary founded by the two architects.
Atmel recently released the Atmel AVR32 line of microcontrollers. These are 32-bit RISC devices featuring SIMD and DSP instructions,
along with many additional features for audio and video processing, intended to compete with ARM based processors. Note that
the use of "AVR" in this article refers to the 8-bit RISC line of Atmel AVR Microcontrollers. The acronym AVR has been reported
to stand for Advanced Virtual RISC. It's also rumoured to stand for the company's founders: Alf and Vegard, who are evasive
when questioned about it. Contents [hide] 1 Device Overview 1.1 Program Memory 1.2 Data Memory and Registers 1.3 EEPROM 1.4
Program Execution 1.5 Speed 2 Development 3 Features 4 Footnotes 5 See also 6 External Links 6.1 Atmel Official Links 6.2
AVR Forums & Discussion Groups 6.3 Machine Language Development 6.4 C Language Development 6.5 BASIC & Other AVR Languages
6.6 AVR Butterfly Specific 6.7 Other AVR Links [edit] Device Overview The AVR is a Harvard architecture machine with programs
and data stored and addressed separately. Flash, EEPROM, and SRAM are all integrated onto a single die, removing the need
for external memory (though still available on some devices). [edit] Program Memory Program instructions are stored in semi-permanent
Flash memory. Each instruction for the AVR line is either 16 or 32 bits in length. The Flash memory is addressed using 16
bit word sizes. The size of the program memory is indicated in the naming of the device itself. For instance, the ATmega64x
line has 64Kbytes of Flash. Almost all AVR devices are self-programmable. [edit] Data Memory and Registers The data address
space consists of the register file, I/O registers, and SRAM. The AVRs have thirty-two single-byte registers and are classified
as 8-bit RISC devices. The working registers are mapped in as the first thirty-two memory spaces (000016-001F16) followed
by the 64 I/O registers (002016-005F16). The actual usable RAM starts after both these sections (address 006016). (Note that
the I/O register space may be larger on some more extensive devices, in which case memory mapped I/O registers will occupy
a portion of the SRAM.) Even though there are separate addressing schemes and optimized opcodes for register file and I/O
register access, all can still be addressed and manipulated as if they were in SRAM. [edit] EEPROM Almost all devices have
on-die EEPROM. This is most often used for long-term parameter storage to be retrieved even after cycling the power of the
device. [edit] Program Execution Atmel's AVRs have a single level pipeline design. The next machine instruction is fetched
as the current one is executing. Most instructions take just one or two clock cycles, making AVRs relatively fast among the
eight-bit microcontrollers. The AVR family of processors were designed for the efficient execution of compiled C code. The
AVR instruction set is more orthogonal than most eight-bit microcontrollers, however, it is not completely regular: Pointer
registers X, Y, and Z have addressing capabilities that are different from each other. Register locations R0 to R15 have different
addressing capabilities than register locations R16 to R31. I/O ports 0 to 31 have different addressing capabilities than
I/O ports 32 to 63. CLR affects flags, while SER does not, even though they are complementary instructions. CLR set all bits
to zero and SER sets them to one. (Note though, that neither CLR nor SER are native instructions. Instead CLR is syntactic
sugar for [produces the same machine code as] EOR R,R while SER is syntactic sugar for LDI R,$FF. Math operations such as
EOR modify flags while moves/loads/stores/branches such as LDI do not.) [edit] Speed The AVR line can normally support clock
speeds from 0-16MHz, with some devices reaching 20MHz. Lower powered operation usually requires a reduced clock speed. All
AVRs feature an on-chip oscillator, removing the need for external clocks or resonator circuitry. Because many operations
on the AVR are single cycle, the AVR can achieve up to 1MIPS per MHz. [edit] Development AVRs have a large following due to
the free and inexpensive development tools available, including reasonably priced development boards and free development
software. The AVRs are marketed under various names that share the same basic core but with different peripheral and memory
combinations. Some models (notably, the ATmega range) have additional instructions to make arithmetic faster. Compatibility
amongst chips is fairly good. See external links for sites relating to AVR development. [edit] Features Current AVRs offer
a wide range of features: RISC Core Running Many Single Cycle Instructions Multifunction, Bi-directional I/O Ports with Internal,
Configurable Pull-up Resistors Multiple Internal Oscillators Internal, Self-Programmable Instruction Flash Memory up to 256K
In-System Programmable using ICSP, JTAG, or High Voltage methods Optional Boot Code Section with Independent Lock Bits for
Protection Internal Data EEPROM up to 4KB Internal SRAM up to 8K 8-Bit and 16-Bit Timers PWM Channels & dead time generator
Lighting (PWM Specific) Controller models Dedicated I²C Compatible Two-Wire Interface (TWI) Synchronous/Asynchronous Serial
Peripherals (UART/USART) (As used with RS-232,RS-485, and more) Serial Peripheral Interface (SPI) CAN Controller Support USB
Controller Support Proper High-speed hardware & Hub controller with embedded AVR. Also freely available low-speed (HID)
software emulation Ethernet Controller Support Universal Serial Interface (USI) for Two or Three-Wire Synchronous Data Transfer
Analog Comparators LCD Controller Support 10-Bit A/D Converters, with multiplex of up to 16 channels Brownout Detection Watchdog
Timer (WDT) Low-voltage Devices Operating Down to 1.8v Multiple Power-Saving Sleep Modes picoPower Devices
Atmel AVR assembler programming language
Atmel AVR machine programming language